Showing posts with label SET UP GROW ROOM -- E-mail. Show all posts
Showing posts with label SET UP GROW ROOM -- E-mail. Show all posts

8/15/12

E-mail – HPS and Internode Stretching: Is It Time for an LED or Conversion Bulb?

Dr Myers,
    Is it true that hps bulbs cause more Internode stretching if the spectrum is not balanced with blue? do you believe an LED could be used to provide blue light to the flowering plants effectively enough to decrease Internode stretching?

I have only used hps bulbs so far. The 18 month mark came and I replaced all 3 with new htgsupply hps bulbs just like the ones that came with the light kits, and I feel this "pang" of wondering if i could get better results by either adding a halide conversion bulb or adding LED's. I understand the only way I can find out would be through scientific experimentation myself but my emotions keep me from spending the money on LED's. I am afraid to swap out 1 of the 3 hps bulbs with a conversion bulb because I don't yet have a light mover and the conversion bulb would light only one 3' x 3' bed - and that doesn't seem like an actual change to the spectrum in the entire room would take place. Is it time for me to bite the bullet and start the experiment or do you think I’m way off track here?

Thanks for the E-mail. Yes, HPS will cause internode stretching in most plant species. This is due to the light output being more in the yellow/red range, and a lack of blue light. However, if your plants are flowering, I’d not use a conversion bulb, they have a much lower output of light. (Read my post on flowering and HPS vs. MH)You may want to bend or prune your plants. You want the maximum amount of light to maximize your yield. If you are using this room for vegetative growth, then you may want to use a conversion bulb, or get an MH, which is much better for vegetative as far as internode stretching (there is no problem with MH’s)  but and HPS putts out a lot more light intensity than an MH.

As far as LED’s, you could put in an all BLUE LED to correct the problem. You could get 2-3 panels and put them beside the HPS you already have to cover the grow area. This blue light won’t need to be as intense; you just need to increase the blue to decrease the internode stretching. A Tri-Band LED would also reduce the internode stretching. I have only used a 90 and 120 Watt LED, but I am going to use a 300 W from HTGSupply.com this semester, and I am assuming it will be compatible to a 400 W HPS. I will let you and other readers know.

You may want to think about a light mover, since you have multiple lights. You could increase the grow area, and at the least you would get better growth on the peripheral areas. Without moving the light or plants the plants on the edge of your grow area won’t get the optimal amount of light. You could then put an LED or MH in the room and move it around with the other lights. I think this is the best option, but it is also the most expensive one.

Good Growing,
Dr. E.R. Myers

3/22/11

E-mail Set up of Filter, Reflector and Fan

Hello There Doc,
  I have a small grow enclosure (2x4x5) with a 400w hps air cooled reflector and a 4" inline fan for air exchange with a carbon filter. i was just wondering what the most efficient way to incorporate all these items. For example what is the best order to use these items. filter-reflector-fan. all obviously connected with 4" ducting. will this reduce the efficiency of the filter at all? and how air tight are the reflectors with a glass lens? odor and heat must be controlled. Thank you

Thanks for your E-mail. I have forwarded your question to Perry at Sales@HTGSupply.com. He is better qualified to answer questions about equipment while I answer any questions about plants and the environment you create to grow plants. If you have any biological questions please send me another E-mail
Good Growing,
Dr. E.R.Myers

From Perry at Sales@ HTGSupply.com
Hello
Thank you for your purchase. I got this question forwarded from our ASK THE DOC section. He deals with just actual growing questions and that is why he forwarded this to me.
Your idea for most efficient way to set those up is correct,” filter-reflector-fan". The manufacturers of both the filters and the fans, regardless of whom the manufacturer is, recommend having the fan at the very end pulling air threw then out the fan. Just like you mentioned! The reason being if set up so the fan is "pushing" the air through, there will be resistance from the ducting and reflector that will slow down the CFM, thus you won't get the same performance. However, if it is "pulling" at the end then out the fan, the resistance isn't as bad thus you get better performance.

Thanks again and have a nice day
Perry
Shipping Manager
www.htgsupply.com

1/31/10

SET UP -- SUPPLIES AND LED’s

Hi doc,
Simple question...do LED lights work? Specifically do your LED lights works? i only want to purchase One Led light...UFO L.E.D. Grow Light for growing inside a standard 4 drawer filing cabinet sized enclosure...will this work?
Also I have been trying to find a definitive list of what else to purchase with the  LEDlight to complete my growing system, can you assist?
Many Thanks

There is a lot of hoopla about LED. I am just starting to use them. I have used an LED with the same wavelength output as the UFO designed by HTGSupply.com. I can say from personal experience it will grow plants very well that get some secondary sunlight or HPS light.  Right now, I am germinating seedlings that will be grown 100% with this LED in a grow tent.  I am assuming it will work fine since HTGSupply.com has  sold 1000's of LED lights.  If it did not work at all I think someone would have said so by now. My big question is are they better than say using fluro's. I know they are not better than an HID for larger areas. However, you are not growing in a large area. I honestly think that you might have a nice little set up with the UFO in the space you described.

As far as other supplies, you need containers for your plants to grow in, plastic pots work best for the price and I am trying out some grow pots that are made of fabric, which is more environmentally friendly than plastic. Potting soil is the easiest medium to grow in. You can use it from seedlings to harvest. You can mix it with vermiculite, perilite or coir depending on what type of medium  is best for your plants. What I like about soil is that once you use it a couple times you can get rid of the dirt in an outdoor garden or flower bed.

You will need to hang the light and adjust it as the plants grow, you might want an adjustable hanger. You should also try to make the inside reflective with white paint or my new favorite mylar. You may want to mount a small fan on the top to get good air flow which will increase the growth rate.

You will need some fertilizer; fertilizer higher in the first number (nitrogen) is for vegetative growth and fertilizer with a higher second number (phosphorus) is for flowers.

You need a container to water the plants with and mix the fertilizer in. (I reuse 1 gal. milk or OJ jugs) and a tray or something to catch the water that runs through the plants when you water them.  You need drainage holes in the containers the plants are in.

A thermometer to check the temperature and humidity is nice and can let you know if you need to make changes to improve your growth, but not essential.

A root warmer will help with germination and will keep the roots warm if your grow area might get chilly in the winter.

Of course you can get all this and more at HTGSupply.com.  That should be enough to get started.

Good Growing,
Dr. E.R. Myers

1/10/10

Best temperature and easy cool 6 vs. Airoflow reflector

Hi,
I am starting a indoor garden, I am looking at the easy cool 6, and Airoflow reflector. I am planning on running (2) 600 watt systems in my flowering room. I like the the easy bulb access of the Easy Cool, but I am thinking the Airoflow would be better, because of the width. My room is 10' x 10', with the grow area being aprox 4' x 6', with a liitle room to expand to 6' x 8'. I have a 2nd room that I will use for Vegetative growth, planning on running one 600 watt system, would the wider reflector work better for growth?

Also another question, with the cold weather approaching, and the fresh air coming into the room being a little colder... Is the soil temperature more important then the room temperature. For example what if the room temp drops to 65 degrees F, when the lights are off, and the soil stays at 72 degrees F?  I will be ordering my lights as soon as I make a decision on the reflector, then I can run the lights and fans and monitor room temps. May have to run C02 system if the fresh air is too cold.
Your thoughts are greatly appreciated.

Hello,
I am going to forward your first question to Sales@htgsupply.com. I have limited experience with specific reflector types. The sales manager Perry knows all about that stuff and would give you better advice. (see his reply below)
I can answer your second question. The soil temperature is equally as important as the air temp. Every biological process has an optimum temperature where the process goes at its fastest pace (speed up growth cycle link). This is why certain seeds germinate only at a specific temperatures. (temperature and seed germination link)   Also, most of the soil microbes function best at 25-35°C. (That is about 75-95 F btw) Your temperatures, if an actual reading are ok. For most plants soil in the 60's is fine. Air temperatures "night- lights off" in the 60's - 70's are also fine. Obviously, different plants have different optimal temperatures but in general plants do not have any damage with air temperatures above the 40's F. Depending on the species of plant you are growing they may not even have tissue damage until the upper 30's F.  Keep in mind though that plant growth will be slowed with temperatures even as low as in the 50's so keeping it in the 60's at night is ideal.

Also, if you are going to induce flowering, you will get more flowers faster if the night time temperature is around 20 degrees colder than the day temperature. So, it sounds like you have a pretty good system as things are.
Make sure you take the temperature reading near the air intake and across the room in winter.  There could be a big difference between where the fresh air comes in and the other side of the room.  If the air coming in is in the 40's or cooler in the winter, this may harm your plants that are near the air intake.  I will also say that with your fresh air intake make sure you have a screen to block any pests from getting in. If you have CO2 already in place, you'd get better growth rates using a CO2 generator than just fresh air.

Good Growing,
Dr. E. R. Myers

Hello

Thank you for your interest in our products. This is Perry, I got this message forwarded to me from our"Ask the Doctor" section. I see that he answered the second question, so obviously I got
the first.
When it come to the differences between those two reflectors, besides
size there is not much. The AiroFlow used to have a glass piece that slid out so a
tight air seal was impossible, they have now added the hinged glass and rubber seal, thus one upping the EasyCool 6 which for the longest time was our ONLY sealed reflector.  EasyCool 6 on the other hand used to have a fix socket bracket. So you would get a tighter light spread from the EasyCool 6 than the Airoflows larger design. Now the EasyCool 6 has a adjustable socket bracket that allows you to move the socket closer to or further from the glass/reflective material thus allowing you to spread it better, or tighten it up as you desired.
This feature is also on the AiroFlow so I guess that would give you the best possible spread, but not by much.  Price wise, EasyCool 6 wins. Spread wise, Airoflow wins.

Thanks again and have a nice day
Perry
Shipping Manager
www.htgsupply.com